Advance-adapters 50-0432 User Manual download pdf

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific types of conversions. Modifications to any of the

components will void any possible warranty or return privileges. If you do not fully understand the modifications or changes that will be required to complete

your conversion, we strongly recommend that you contact our sales department for more information. This Instruction Sheet is only to be used for the assembly

of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque vales, wiring diagrams and

other related equipment. These manuals are normally available at automotive dealerships and parts stores.

ADVANCE ADAPTERS, INC. P/N: 50-0432

P.O. Box 247, 4320 Aerotech Center Way New Item: (06/06)

Paso Robles, CA 93447 PAGE: 1 OF 4

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 05-20-08

KIT CONSISTS OF:

No. Qty. Part No. Description

GM 4L60E 4WD HEX BOLT PATTERN

TO DANA 300

1. 1 300619 SENSOR

2. 1 51-0405 CASTING

3. 1 51-9111 CASTING

4. 1 52-0432 DANA 300 INPUT SHAFT

5. 1 716074 RELUCTOR RING

6. 1 716079 PLUG

7. 1 716308 BEARING (#6209)

8. 1 716511 "O"-RING

9. 1 716517 GASKET

10. 1 716749 NATIONAL SEAL 471870

11. 4 720011 10mm X 1.5 NUT

12. 4 720061 10mm-1.5 X 50mm STUD BOLTS

INSTALLATION INSTRUCTIONS:

This kit is designed to use a stock 4L60E 4x4 hex bolt pattern transmission to a Dana 300 transfer case. If you do not have

the 4X4 version of the 4L60E, you will have to purchase a new GM output shaft. To assemble this adapter, you will have

to modify your output stickout from the back of the transmission case. The proper cut off length is 4.10". This measurement

should be taken from the rear of the transmission case.

1. Starting at the Dana 300 transfer case, remove the 6 socket head bolts from the aluminum index hub on the front side

the transfer case.

2. Using the two slots on the side of this retainer, you will need to pry the retainer out of the transfer case. This retainer

assembly does pilot into the rear output shaft of this transfer case. If the retainer assembly seams tight to remove, try

spinning the rear output shaft.

3. Once the retainer is removed you will need a pair of snap ring pliers to remove the snap ring that retains the drive gear

to the input shaft. Remove the snap ring and the drive gear from the input shaft. The aluminum retainer should now

have the bearing, input shaft, seal, and a snap ring holding the bearing into the retainer. This snap ring must also be

removed to allow the bearing and input shaft to be pressed out of the index housing.

4. The seal will also be required to be pressed out of the index retainer. The retainer should now be empty.

5. Install the new bearing onto the new input shaft. Install both components into the stock retainer and install the stock

snap ring.

6. Install the input drive gear onto the input shaft and retain it with the stock snap ring. Make sure the gear is installed

so that the cogged side of the gear is facing away from the bearing.

Optional items:

716055 Mount

1 2 3 4

Summary of Contents

Page 1 - TO DANA 300

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific types of conversions. Modifications to any of thecomp

Page 2

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific types of conversions. Modifications to any of thecomp

Page 3

ADVANCE ADAPTERS, INC. P/N: 50-0432P. O. Box 247, 4320 Aerotech Center Way New Item: (06/06)Paso Robles, CA 93447 PAGE: 3 OF 4Telephone: (800) 350

Page 4

ADVANCE ADAPTERS, INC. P/N: 50-0432P. O. Box 247, 4320 Aerotech Center Way New Item: (06/06)Paso Robles, CA 93447 PAGE: 4 of 4Telephone: (800) 350

Comments to this Manuals

No comments

Advance-adapters 50-0432 User Manual

Browse online or download User Manual for For the car Advance-adapters 50-0432. Advance Adapters 50-0432 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Advance-adapters 50-0432